The Maretron J2K100 converts data from J1939 engine networks to NMEA 2000 so engine parameters and fuel information are available across your vessel; when paired with Maretron DSM displays and a GPS200 antenna it can show fuel rate and efficiency in litres per hour (gallons per hour) and kilometres per litre (miles per gallon). Protocol conversion: maps J1939 PGNs to NMEA 2000 PGNs Common data types: engine speed, fuel rate, coolant temperature, oil pressure, battery voltage Works with DSM250, N2KView and GPS200 for fuel-economy readouts Connects to your NMEA 2000 network for plug-and-play integration (Micro‑C compatible) LED status indicators for quick diagnostics Compact, sealed marine enclosure suitable for engine spaces Configurable PGN mapping and filtering via N2KView Order the Maretron J2K100 to integrate J1939 systems with your NMEA 2000 network or contact us for compatibility guidance.
£436.00 £350.00
This VE.Direct to USB interface cable connects a Victron MPPT solar charge controller or any VE.Direct‑equipped device to a PC for monitoring and programming via the VictronConnect app. Download the free VictronConnect PC app from Victron Energy to monitor, log and programme your system. Compatible with any Victron device that has a built‑in VE.Direct port, including BlueSolar MPPT controllers such as VBSM75‑15, VBSM100‑30, VBSM100‑50 and VBSM150‑35. Advanced programming and monitoring: live data transmission displays solar panel voltage, charging current and battery state‑of‑charge in real time. Data logs: view detailed system activity for the past 30 days and export logs for analysis. User‑defined battery charging algorithm: disable preset values in favour of personalised charging parameters, including adjustable temperature compensation settings. Load configuration and scheduling: choose a pre‑set load management programme or create a custom schedule (e.g. dusk‑to‑dawn lighting). Remote On/Off control: switch the controller or connected load from your PC. Alternative connection: use the VictronConnect mobile app on supported phones and tablets. Specifications: cable length 0.9 m (3.0 ft); weight 25 g (0.88 oz); compatible with Windows and macOS (OS X 10.10 Yosemite and later); 5‑year warranty. User manual and support documents available to download. Ensure your Victron device has a VE.Direct port before ordering; contact us for compatibility assistance or further product information.
£39.99
Compact RS-485 Modbus card (Modbus RTU) that enables serial communication between Iconica grid-tie and hybrid inverters and external devices. Modbus RTU (RS-485) serial communication for data exchange with devices such as BMS, PC/PLC, UPS, and energy meters. Plugs into the inverter's built-in intelligent slot to enable self-consumption control and battery management. Suitable for single-phase and three-phase grid-tie and hybrid systems. Typical applications: lithium batteries with a BMS, UPS integration, PLC/PC monitoring and control, and energy metering in inverter systems. Please note: This Modbus card only works with compatible Iconica inverters; download (PDF): RS-485 Modbus card user manual (IC-MODBUS) — compatibility, supported models, pinout, wiring, and protocol settings (Modbus RTU, baud rate options).
£89.99
The TMP100 Temperature Module from Maretron monitors and reports vessel temperatures over an NMEA 2000 network, supporting multiple thermistor and thermocouple probes. Supports up to 6 probes: 4 thermistor + 2 high‑temperature thermocouple Thermistor range: −20°C to 80°C (−4°F to 176°F) Thermocouple range: 0°C to 900°C (32°F to 1652°F) — suitable for EGT Reports data across NMEA 2000® for system‑wide display and logging Compatible with N2KView® vessel monitoring and control systems Ideal for cabin, engine‑room, refrigerator/freezer, tank and duct temperatures Compact module for straightforward network installation and integration Optional thermistor and thermocouple probes are available for specific installations; view all temperature data on any compatible NMEA 2000 display or via N2KView.
£334.00 £295.00
Monitor and programme Victron BlueSolar or SmartSolar MPPT charge controllers via the VE.Direct MPPT control panel with an easy‑read LCD and live system data. Compatible Victron products: Designed for use with Victron MPPT charge controllers fitted with a VE.Direct port; e.g. BlueSolar models such as VBSM75-15, VBSM100-30, VBSM100-50, VBSM150-35, VBSM150-45, VBSM150-60 and VBSM150-70, and selected SmartSolar models. Advanced programming and monitoring: Connecting this MPPT control panel to your Victron solar charge controller unlocks remote checking and programming of charging parameters and system configuration. Live data transmission: Real‑time display of solar panel power, battery voltage, state of charge and charging stage information. 30‑day data logs: View system activity as daily values or cumulative 30‑day summaries. Daily data includes energy yield, maximum recorded power and voltage, time spent in each charging stage and daily error records; 30‑day data includes total cumulative energy yield and maximum recorded panel voltage plus min/max battery readings. User‑defined battery charging algorithm: Option to disable preset values in favour of personalised charging parameters, including temperature compensation settings. Load configuration: Configure load behaviour on BlueSolar or SmartSolar MPPT controllers that provide load terminals (for example VBSM75‑15 and similar models). Connection note: As default, VE.Direct connection cable between the MPPT control panel and BlueSolar/SmartSolar controller is not supplied. Specifications: Supply voltage range 5 V; current draw (without backlight) < 4 mA; operating temperature range -20°C to +50°C (-4°F to 122°F); diameter of front round face 63 mm (2.48 in); overall dimensions approx. 63 mm diameter x 31 mm depth (2.48 in x 1.22 in); hole required for flush mounting approx. 54 mm diameter (31 mm depth); weight 61 g (2.15 oz); covered by a 5‑year warranty. Please check controller compatibility and note the VE.Direct lead is sold separately. Download the user manual and additional documents from the product page for full installation and wiring instructions.
£94.90
Parallel kit for linking identical Iconica 48 V KMS or ZT series hybrid pure sine wave inverters in parallel. Compatible models: Iconica 48 V KMS series hybrid inverters (4,000 W and 5,000 W) and Iconica 48 V ZT series inverters — compatible with identical units only. Kit includes: 1 x circuit board, 1 x communication cable and 1 x current sharing cable. A maximum of nine Iconica KMS or ZT series inverters can be connected together in parallel to increase total system power handling. Paralleled inverters can be configured for single‑phase or three‑phase operation for heavier industrial or three‑phase loads. One parallel connection kit is required per Iconica inverter. For example, connecting two inverters requires two kits. Connection is straightforward; full instructions are supplied and the user manual for the parallel connection kit for Iconica 48 V KMS or ZT series hybrid inverters is available to download. Not compatible with other Iconica models — only for identical 48 V KMS or ZT series hybrid inverters (4,000 W–5,000 W; approx. 5.4–6.7 hp). Please ensure all connected inverters are identical model and firmware version before paralleling; follow the supplied manual for safe installation and commissioning.
£79.99
The Iconica MAX 8000W 48 V hybrid pure sine inverter combines inverter, MPPT solar input and intelligent battery charging in a single portable unit ideal for off‑grid, marine and backup use. 8000W 48 V pure sine wave inverter: converts DC to 230 V AC mains; 8,000 W continuous output, strong peak handling up to 16,000 VA for motor starts (220–240 V AC). High solar input MPPT controller: two independent solar inputs each accepting up to 4,000 W of panels; MPPT charging at up to 80 A, with full safety protections. Enhanced 120 A smart battery charger: unattended multi‑stage charging up to 120 A for fast, safe battery recovery and flexible charging profiles. System expansion potential: parallel capability to increase output by connecting additional identical inverters for larger installations. Power loads without a battery: unique ability to run AC appliances directly from solar input when PV is available (no battery required). Output source & battery charging priority: configurable source priority options (solar, mains/generator, battery) and multiple charging priority modes for tailored system behaviour. Advanced user controls and diagnostics: highly customisable settings, illuminated removable LCD screen (status, mode, voltages, frequency, battery, load), programmable RGB light bar and PC monitoring software with connection cable for data logging. Reliability & protection: auto‑restart after overload/overheat, generator auto‑start via dry contacts, predictive fan logic for intelligent cooling and multiple safety protections. Compatibility & basic specs: suitable for 48 V flooded, sealed GEL/AGM lead‑acid and many lithium chemistries (check battery profile in settings). Nominal battery voltage 48 V; continuous power 8,000 W / 8,000 VA (220–240 V AC). Please consult the product datasheet for a table of typical appliance power consumption and full technical details prior to installation; ensure battery type and settings are matched to your system.
£1,499.99
This MC4-compatible adaptor with a 10 A blocking diode lets you connect multiple solar panels in parallel to a single solar charge controller while preventing reverse current. Connector type: male MC4-compatible plug to female MC4-compatible socket — fits standard PV cables. Rating: 1000 V DC, 10 A DC. Use case: connect several panels in parallel (common positive and common negative) to one charge controller. Prevents backflow of power from battery to panels, especially useful with mismatched panel sizes or shaded panels. Also usable as a blocking diode for a single panel to stop battery discharge at night. Suitable for mixed series/parallel arrays when system voltage and current remain within 1000 V / 10 A limits. Fully waterproof for outdoor use and easily disassembled for diode replacement. Compatibility/care: fits MC4-compatible PV cable ends — always ensure the array and controller do not exceed the adaptor's 1000 V, 10 A DC rating and reseal correctly after any maintenance.
£14.99
Maretron Micro FA-CM-ST straight male connector for field termination of micro and mid bulk cable. Model: FA-CM-ST Straight male, field-attachable design Colour-coded screw terminals to match wire colours Compatible with micro and mid-sized bulk cable Allows on-site termination to bulk cable Compact form factor for close installations Use this connector to make quick, accurate field connections to bulk cable during installation or repair.
£58.00 £25.00
Steca Tarom 60 A S‑Type MPPT solar charge controller with two independent MPPT trackers for off‑grid systems. Two independent MPPT trackers and two solar inputs — handles two different module arrays. Nominal battery voltage: 12 V / 24 V / 48 V; rated charging current: 60 A. Solar input maximum power: 850 W (12 V), 1700 W (24 V), 3400 W (48 V). MPP efficiency: 99.9% (static), 99.8% (dynamic); max DC–DC efficiency: 99.4% (Ubatt = 48 V Pnom); minimum operating voltage: 9.5 V. Includes protection against overload, short circuit, high voltage, reverse polarity, high temperature, lightning and transient surges, and reverse current at night. Extremely high reliability with an integrated self‑test function and a long 5‑year warranty. Graphical LCD display with automatic data logging for 20 years; low self‑consumption. Enclosure IP31 (indoor); working temperature −25 °C to +50 °C (−13 °F to +122 °F); size 294 x 335 x 130 mm (11.6 x 13.2 x 5.1 in); weight 6.0 kg (13.2 lb). Compatible with lead‑acid batteries (AGM, Gel, flooded). Multiple Tarom controllers can be networked for system expansion; one M‑Type must be fitted as the master for synchronous charging. Data sheet and instruction manual are available to download.
£889.99
Pluggable LCD display for Victron SmartSolar MPPT solar charge controllers, providing on‑unit monitoring and programming of charging, relay and logging functions. Simply remove the rubber seal on the face of your SmartSolar controller and plug in this LCD display to access monitoring and programming functions. Live data transmission: real‑time solar panel output, battery voltage and current, load status and current, and charging stage information. Relay programming: programme relay contacts to trigger alarms for high/low battery or panel voltages and temperatures, or to start a generator automatically. 30‑day data logs: view today's or cumulative 30‑day values — daily energy yield, maximum recorded power and voltage, time spent in each charging stage, maximum battery current, minimum and maximum battery voltages and daily error records; 30‑day totals include cumulative energy yield, maximum panel voltage and recent errors. User‑defined battery charging algorithm and temperature compensation settings: disable presets and set personalised charging parameters. Load configuration and temperature sensor readings: configure load terminals where present; temperature values available for both the battery and the solar charge controller (internal or external sensor). Display options: adjust backlight and text scroll speed for easier viewing. Compatibility and specifications: compatible with Victron SmartSolar MPPT controllers with a plug‑in display port (eg VSSM150‑45, VSSM150‑60, VSSM150‑85, VSSM150‑100). Fitted dimensions: 97 x 49 x 19 mm (3.82 x 1.93 x 0.75 in). Dimensions including plug (standalone): 97 x 49 x 27 mm (3.82 x 1.93 x 1.Ø 6 in). Weight: 64 g (2.26 oz). Product covered by a 5‑year warranty. Ensure your SmartSolar controller has the plug‑in display socket before purchase; refer to the controller manual for full compatibility and installation guidance.
£64.90
SDM630-Modbus V2 single‑ and three‑phase energy meter for self‑consumption control with Modbus RTU communications. Measures single phase (1p2w), three phase three‑wire (3p3w) and three phase four‑wire (3p4w) supplies; displays voltage, frequency, current, power and imported/exported/total energy in kWh and kVArh. Direct connection up to 100 A — no external current transformer required, simplifying installation and reducing cost. RS‑485 Modbus RTU interface for integration with Iconica grid‑tie hybrid inverters and other controllers. Two pulse outputs (one configurable) for real‑time energy signalling and external monitoring. Clear LCD with user‑friendly navigation menu for on‑site readings. Specifications: Dimensions: 72 x 100 x 66 mm (2.8 x 3.9 x 2.6 in); Weight: 0.32 kg (0.71 lb); Operating temperature: −25 °C to +55 °C (−13 °F to +131 °F). Wiring terminals: Communication/pulse 0.5–1.5 mm² (20–16 AWG); Load 4–25 mm² (12–4 AWG); Relative humidity 0–90% (non‑condensing); Altitude: up to 2000 m (6,562 ft). Covered by a 1 year manufacturer warranty. User manual for SDM630‑Modbus V2 smart energy meter (IC‑METER) available to download: https://www.photonicuniverse.com/upload/file/Manuals/Iconica/IC-METER/SDM630-Modbus_V2_user_manual.pdf Suitable for use with Iconica grid‑tie hybrid inverters for self‑consumption and battery‑charging control; professional installation and correct earthing are recommended.
£129.99
MC4 Solar Connectors for 10mm² Cable Premium 2-Pair Kit (Male & Female Sets) Upgrade your solar array with these heavy-duty MC4 compatible connectors, specifically engineered to accommodate 10mm² (8AWG) cable. Most standard connectors are designed for smaller 4mm² or 6mm² wires; these specialized variants feature larger internal crimp terminals and wider seals to ensure a secure, weather-tight connection for high-current applications and long-distance cable runs. RELIABILITY: Engineered with UV-resistant PPO housing and tin-plated copper contacts to prevent oxidation and ensure maximum conductivity in harsh marine or outdoor environments. Key Features ✔ Complete Kit: Includes 2x Male and 2x Female connectors. ✔ 10mm² Optimized: Fits larger 8AWG solar cables. ✔ IP67 Rated: Fully waterproof and dust-proof. ✔ Safe Locking: Stable self-locking system for secure attachment. Technical Specs Rated Current: 45A - 50A Rated Voltage: 1000V DC / 1500V DC Cable Size: 10mm² (8AWG) Waterproof Class: IP67 Temperature: -40°C to +90°C Contact Material: Copper, Tin Plated Compatibility / Fitment Guide Application Compatibility Notes Solar Panels Compatible with all PV panels pre-fitted with MC4 standard leads. Cable Type Specifically for 10mm² (8AWG) cross-section solar cable. Systems Ideal for high-power residential, marine, or commercial PV arrays. OEM Cross Reference Stäubli (Multi-Contact) Ref: 32.0034P0001 (Female) / 32.0035P0001 (Male) Generic SKU: MC4-10MM-2P / PV-KBT4-KST4-10 Questions & Answers Is this a genuine original part? This is a premium quality aftermarket replacement part, manufactured to meet or exceed original equipment (OE) standards for fitment and performance. How do I know if it is compatible? If you are using 10mm² (8AWG) solar cable, these are the correct connectors. They plug directly into the standard MC4 connectors found on the back of almost all solar panels. Do I need a special tool to install these? Yes, we highly recommend using a dedicated MC4 crimping tool designed for 10mm² terminals to ensure a gas-tight connection and optimal power transfer. Note: Please verify your original cable diameter against the references above before purchasing. Available at 4boats.co.uk.
£7.99
The Maretron MPower CLMD12 J2 input cable is 1 m (3.3 ft) long and provides a secure connection for the CLMD12 DC load module. Deutsch connector to bare wire ends for direct termination Cable length: 1 m (3.3 ft) J2 input mating connector with leads for use with the Maretron MPower CLMD12 Single-lead length ideal for panel or enclosure routing Sold as cable only; MPower CLMD12 module not included.
£68.80 £48.80
Wi-Fi remote monitoring kit for Iconica hybrid inverters provides short- and long-distance remote monitoring with email alerts and online portal access. Short-distance mode: creates a Wi-Fi network the user can access from a nearby location (approx. 10-50 m radius depending on obstructions) on a mobile device. Long-distance mode: connects the kit to an existing broadband network to transmit inverter data to an online server for viewing via any internet browser. Kit includes: Wi-Fi card and unit (with antenna) and DB9-to-RJ45 cable for connection to the Iconica inverter. Additionally required: broadband network (only for long-distance monitoring) and a mains-to-12 V DC power adapter for some inverter models. Online DataCenter portal: communicates with the Iconica inverter to transmit data. Live in-depth monitoring refreshed every 5 minutes includes: PV input power and voltage, battery voltage, charging current, grid voltage, grid output voltage/frequency, and battery capacity percentage. Remote monitoring features: detailed datalogs and indefinite alarm history storage; system status diagrams and infographics; regional monitoring to group and view multiple Iconica inverters; multiple user access with administrator account management; and email notifications for faults, warnings and status updates (one Wi-Fi kit required per inverter). Compatibility: designed for Iconica hybrid inverters. Iconica 4 kW and 5 kW KMS series can power the kit via the included RJ45 cable; other Iconica inverters require a mains-to-12 V DC adapter with a 5.5 x 2.5 mm DC jack. Specifications: rated voltage 12 V; DB9-to-RJ45 communication cable length 1.5 m (4.9 ft); Wi-Fi box dimensions 120 x 61 x 34 mm (4.72 x 2.40 x 1.34 in); mounting brackets 31 x 12 mm (1.22 x 0.47 in) each with 8 mm diameter hole; antenna length 115 mm (4.53 in); Wi-Fi box weight (including card and antenna) 335 g (0.74 lb). Warranty & docs: product covered by a 1 year warranty and user manual available to download for setup and further information. Please ensure one Wi-Fi kit is fitted per inverter and consult the user manual for installation and compatibility details.
£119.99
The Maretron TLM200 ultrasonic tank level monitor measures fluid depth from the top of the tank and broadcasts readings over the NMEA 2000® network for vessel‑wide display. Ultrasonic sensing to 2.64 m (104 in) depth NMEA 2000® certified — broadcasts level data on the network Suitable for diesel, fresh water, greywater, blackwater and oil tanks Calibrates for irregular tank shapes for accurate volume readings Mounts to SAE J1810 5‑hole pattern; optional 1.5 in NPT adapter No internal probes — reduces fouling and corrosion Compatible with N2KView® and Maretron DSM displays
£799.00 £779.00
The Maretron Mini male-to-micro female reducer adapts a Mini-sized male connector to a Micro (or Mid) female connector, letting you switch cable sizes in a NMEA 2000 network — for example changing to smaller Micro/Mid cable at the base of the mast to reduce weight and windage aloft. Mini male → Micro (Mid) female connector Compatible with NMEA 2000 networks Switches from Mini trunk to Micro or Mid cable at mast base Enables smaller-diameter cable runs up the mast to reduce weight and windage Compact, low‑profile inline reducer for neat installation Ideal for terminating or adapting network runs where Mini cable is impractical Use this Maretron Mini reducer to simplify NMEA 2000 installations and keep lighter cable aloft — order now or contact us for compatibility advice.
£82.00 £45.00
ROKK Wireless Active delivers 10W Qi-certified wireless charging in an IPX6 waterproof, fully sealed mount for 12/24V boats, RVs and ATVs - secure one-handed docking and faster outdoor charging. Input Voltage Range: 10-30V DC; Max Input Current: 2A Output Power: 10W (9V, 1.1A) Standby Power Draw: Waterproof Rating: IPX6; Qi-certified Charges wireless-enabled phones from all major brands; works through non-metallic waterproof cases Foreign object detection and thermal cut-off for safe, reliable charging Tested to harsh environmental, vibration, impact and on-water conditions Simple installation on boats, RVs and ATVs with four screws; fits 12/24V systems The fully encapsulated unit features high-grip, self-aligning jaws and a smart LED charge indicator. Electrical upgrades deliver up to 60% faster charging for modern, power-hungry devices, even in the toughest conditions.
£164.54 £139.95
Maretron Exhaust Gas Temperature Probe provides reliable monitoring of marine engine exhaust temperatures across a broad range. Exhaust Gas Temperature Probe (0°C to 900°C or 32° to 1652°F). High-temperature thermocouple sensor for durable, repeatable readings. Rugged construction tailored for marine environments. Compatible with common engine-monitoring displays, including Maretron systems. Fast response time for real-time temperature tracking. Simple installation using standard fittings and sealed cable entry. Helps protect engines and optimise performance through continuous monitoring. View product details or contact us for compatibility and installation guidance.
£166.00 £155.00
The Victron BlueSolar MPPT 100/50 (VBSM100-50) is a 50 A solar charge controller for 12 V and 24 V systems, engineered for high efficiency, robust protection and advanced monitoring. Ultrafast MPPT Technology — 50 A controller designed to deliver the highest possible energy yield through rapid maximum power point tracking. Inbuilt safety protection — PV short circuit, PV reverse polarity, PV reverse current, battery reverse polarity, battery overheating (internal temperature sensor) and self-diagnostic fault indication via LEDs. Advanced programming and monitoring — optional MPPT Control Panel (sold separately) provides local programming and detailed status. Live data transmission — real-time information including solar panel and battery voltage, current and power via VE.Direct. Data logs — system activity and performance for the past 30 days. User-defined battery charging algorithm — option to disable preset values in favour of personalised charging parameters. Communications & compatibility — VE.Direct TTL serial (RS232 via interface cable) for VE.Direct accessories; compatible with Windows PCs/laptops and remote monitoring solutions. Key specifications — max solar panel voltage: 100 V; max solar panel power: 700W (12 V) / 1400W (24 V); efficiency >95%; self-consumption: 30 mA (12 V) / 20 mA (24 V); temperature sensor for protection features; working temperature: -30°C to +60°C; IEC/EN certified. Mechanical & protection — cable size up to 13 mm²; enclosure: IP43 (electronic components) / IP22 (connection area); pollution degree PD3; dimensions: 130 x 186 x 70 mm (5.12 x 7.32 x 2.76 in); mounting dimensions: 176 x 71.5 mm; weight: 1.3 kg (2.87 lb); 4 x mounting holes Ø 8 mm. User manual for the Victron 50 A MPPT solar charge controller (VBSM100-50) and product data are available to download. Install in accordance with the manufacturer’s instructions and local electrical regulations.
£294.99
Maretron's FPM100 Fluid Pressure Monitor adapts pressure transducers to the NMEA 2000® network for vessel-wide pressure, vacuum and tank-level monitoring. Model FPM100: connects up to six pressure transducer inputs (transducers sold separately) Reports pressure or vacuum for water, oil and hydraulic systems Tank level mode: bottom-mounted transducer with calibration for irregular tank shapes NMEA 2000® certified; transmits data across the NMEA 2000 network Compatible with N2KView® vessel monitoring and common NMEA 2000 displays Detects system vacuum for clogged-filter and diagnostic applications Rugged marine design for reliable operation in harsh environments Ideal for monitoring fluid pressures and deep or complex tanks where traditional sensors struggle; integrates simply into existing NMEA 2000 installations.
£436.00 £395.00
Compact true sine-wave inverter and multi-stage charger with adaptive battery management and a fast AC transfer switch for reliable onboard power. Inverter input voltage range: 9.5–17.0 VDC. Output voltage: 230 VAC ±2% (adjustable to 240 VAC). Output frequency: 50 Hz ±0.1% (adjustable to 60 Hz). Continuous output power: 500 VA (430 W @25°C, 400 W @40°C, 300 W @65°C). Peak power: 900 W. Max. efficiency: 90%. No-load power consumption: 6 W. Zero-load power in search mode: 2 W. Charger input voltage: 187–265 VAC. Input frequency: 45–65 Hz. Charge voltage (absorption): 14.4 VDC. Charge voltage (float): 13.8 VDC. Charge voltage (storage mode): 13.2 VDC. Charge current (primary output): 20 A. Charge current (secondary output): 1 A (starter battery trickle). Transfer switch current rating: 16 A (@230 VAC). Internal DC fuse: 125 A. AC transfer/UPS operation: automatic transfer in <20 ms. Connections: DC (battery) screw clamp terminals. Max. DC cable size: 16 mm² (≈5 AWG). 230 VAC cable connection: screw connectors (included). Ingress Protection: IP21. VE.Bus communication port for system integration and remote monitoring. Operating temperature: -40°C to +50°C (derating applies above 25°C). Cooling: temperature‑controlled fan (forced air). Weight & dimensions: 4.5 kg (9.9 lb). Overall dimensions: 311 x 182 x 100 mm (12.2 x 7.2 x 3.9 in). Part number: PMP121500000. Datasheet and user manual available. Cables are not supplied. For DC (battery) connection Victron recommend using correctly sized, high‑quality cables and properly crimped ring terminals — see the user manual for guidance and installation limits.
£449.99
A 90° male-to-female connector for Micro and Mid NMEA 2000 cable runs, designed to ease tight bend radii without stressing conductors and ideal for shallow-depth device mounting. 90° male-to-female orientation Compatible with Micro and Mid NMEA 2000 cables Eases tight bend radii to prevent conductor strain Suited for shallow mounting where space is limited Threaded, secure connection for reliable network continuity Low-profile design for compact installations Corrosion-resistant construction for marine use Fits standard NMEA 2000 networks — quick to fit inline to reroute cabling in confined spaces.
£76.00 £35.00
Max Amperage (5 Seconds): 2500A Max Amperage (Continuous): 280A Flange diameter: 66mm Connectors: M10 Heavy duty 280A battery switch with watertight PVC cap and double key. Replacement / additional keys available seperatly see part: 14.385.34
£64.00 £24.00
You have seen 48 out of 167 products
